| View previous topic :: View next topic |
| Author |
Message |
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
 Posted: Thu Sep 06, 2001 7:53 am Post subject: Sender unit --(wharfie) |
 |
|
| I have just bought the tg tacho dash and i need to install the sender unit to make the oil pressure gauge work. Can anyone tell me how to install the unit? |
|
| Back to top |
|
 |
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Thu Sep 06, 2001 8:00 am Post subject: Re: Sender unit --(gem16c) |
|
|
| i think it's already there cause i just plugged my old one in and it worked |
|
| Back to top |
|
|
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Thu Sep 06, 2001 8:16 am Post subject: Re: Sender unit --(fastgem) |
|
|
| you start by getting a sender unit - if you dont already have one, get one from a wreckers off a gemini (good luck finding one) or get one off a commodore blue motor. Then you will need a t-piece so you can run the pressure sender unit and the gauge for the oil warning light at the same time, both just screw into the t-piece. If you cant get a t-piece then try and unscrew one of the allen key bolts in the side of the block and use the unit in there. |
|
| Back to top |
|
|
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Sat Sep 08, 2001 4:59 am Post subject: Re: Sender unit --(locky) |
|
|
| the sender units cost about $45 from a auto parts shop (vdo) |
|
| Back to top |
|
|
|
