| View previous topic :: View next topic |
| Author |
Message |
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
 Posted: Thu Sep 13, 2001 4:43 am Post subject: oil sender unit qs --(wharfie) |
 |
|
| i have a zz/z instrument cluster and have installed the oil pressure sender unit with the two connection points on it. the gauge does not work and i have swapped both wires around but it still doesnt work, what else could b wrong? |
|
| Back to top |
|
 |
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Thu Sep 13, 2001 4:54 am Post subject: Re: oil sender unit qs --(fastgem) |
|
|
| the pressure sender unit could be faulty? |
|
| Back to top |
|
|
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Thu Sep 13, 2001 4:59 am Post subject: Re: oil sender unit qs --(gem16c) |
|
|
| check the circuit board on the back of the instrument cluster for any burns or loose connections |
|
| Back to top |
|
|
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Thu Sep 13, 2001 7:39 am Post subject: Re: oil sender unit qs --(Paul) |
|
|
| Or the guague. |
|
| Back to top |
|
|
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Sat Sep 15, 2001 10:34 pm Post subject: Re: oil sender unit qs --(Woz) |
|
|
| ive got 2 oil sender units, and ive tried both of them with tf/tg dash's and neither of them operate properly - their both off gemmi's but there must be something else that needs to be done to get them working... might they need to be cleaned out and filled with oil seperatley before they get put in?? [simmilar in theory to bleeding your brakes so theres no air in the sensor???] |
|
| Back to top |
|
|
|
