| View previous topic :: View next topic |
| Author |
Message |
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
 Posted: Fri Sep 14, 2001 9:51 am Post subject: 1600 to 2ltr??? --(John) |
 |
|
| Is is possible to bore out a 1600 to a 2ltr without risk of the bore wall becoming too thin?? |
|
| Back to top |
|
 |
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Fri Sep 14, 2001 10:28 am Post subject: Re: 1600 to 2ltr??? --(gem16c) |
|
|
| i've been told you can but i think it's a bit to much and your gonna flog it i wouldn't go that far |
|
| Back to top |
|
|
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Fri Sep 14, 2001 11:31 pm Post subject: Re: 1600 to 2ltr??? --(4BIDIN) |
|
|
Im pretty shore you can only bore it to about 1.7 or 1.8 you have to strock it to get the other cc out off the engine.
IE: grind the crank sharft so the piston is draged more down the bore but not out off the block.
mick from micks motorsport in sydney ph 0404850942 has done a lot of 1600 stroked to 2000 with get sucses. |
|
| Back to top |
|
|
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Sat Sep 15, 2001 2:26 am Post subject: Re: 1600 to 2ltr??? --(Mark) |
|
|
| I gaurantee you cant get 2 litre pistons in a 1600 block cos you hit waterjackets down numbers 2 and 3. You can fit 60thou 1800 pistons, which are 85.5mm and take it out to about 1775 or so ( i think). |
|
| Back to top |
|
|
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Wed Sep 19, 2001 12:44 am Post subject: Re: 1600 to 2ltr??? --(andre) |
|
|
you can fit 2lt pistons but without a two litre crank it will only be a 1.8
|
|
| Back to top |
|
|
|
